AT750KM Right Hand Knife Bonding Machine with Metering System
The AT750K bonding machine has been specifically designed to bond hot melt adhesives onto the edge of a garment/Bra cup and Trim the edge level with the adhesive.
This machine is fitted with an electronic metering tension device to enable the adhesive/fabric to be applied gathered or flat by the use of 5 separate pre tension zones, create tension or slack feed at a particular point in a garment
The machine is controlled by a motor drive system with up to 5 differential speed zones that can be used on one garment, giving the ability to overfeed the top or the bottom to eliminate stretch or help create tension at a particular point in a garment.
The machine has a dedicated heating controller, giving the ability to be fitted with up to 6 separate heating zones at any one time. with individually controlled hot air from above and below the garment/adhesive, it has heated plate and foot belts and optional pre heating application tubes.
This machine also benefits from being designed with height adjustable drive system, allowing the clear passage of complete of bras and cups through the work area and out of the back of the machine.
All the AT750 series machines can be altered into one of the other models by swapping the end section, this allows companies to adapt there production machines to suit different types of garments, where the demand for one model may be higher because the garment type has changed. This allows you to purchase less machines and ensures all your machines are being used for the maximum time.
Features include
Right hand side knife.
Top hot air heater
Bottom hot air heater
Heated Foot with High Temperature drive belt
Heated Platen with High Temperature drive belt
Two extra heating zones available if required.
10 separate differential zones
Watch lay on and trim Movie
